Car Shine Like a Diamond-How to make It
During the summer, nothing beats a super clean and well-waxed car. If you’re like me, can be difficult to replicate the same shine you expect from a professional car detail-er you. Sometimes I think it is almost impossible. After several botched attempts, and countless candles months scouring the internet for answers, I was able to make a compilation of best practices to achieve a high gloss shine and shimmer we all come to expect from a professional.
First and most importantly, ensure that your car in covered or shaded area and out of direct sunlight. Garages or carports that the best work. Sun and heat will cause water to evaporate too quickly when washing may cause spotting. When you try your vehicle, the Sunday was dry on wax and ruin your magnificent. Can also damage the car finish.
Next, you need to wash your car really really clean up. When I say clean, I mean clean. You may exit with a hose and bucket and scrub your hands through your car. You must use the top car shampoo. It is found in every part of car maintenance or auto shop. The natural sea sponge is the best option to clean the car. Start by rinsing for about 1 / 3 of your car. Use a sea sponge to wash the area rinsed from top to bottom part. Often squeeze a sponge and soak in soapy water bucket. When finished, rinse the soap out of the car and move to the next section. Washing a car part in helping to prevent spotting. Use Terry cloth or chamois dry your vehicle. Do not allow to air dry!
If your vehicle is ready to wax, you must specify the type of shine you want. If you are looking to protect your vehicle has natural shine, a thin layer of synthetic wax will do the trick. To get a showroom shine, you need to apply a thin coat of wax on other synthetic carnauba wax coat on it.
When you make a decision, you’re ready to wax. Lightly coat the painted area of a vehicle with a very thin layer of wax using a cloth towel or clean towel. Do not forget to avoid or plastic trim car field, such as wax may not be derived from these materials. Test a small area if you are unsure. After the wax is applied, buff it with a new, very clean Terry cloth. If you find yourself streaking, you can delete them with distilled water. Repeat this process until you are satisfied with the shine.